Area Navigation (RNAV) - CFI Notebook See the latest AC 90-105 for more information on A-RNP, including NavSpec bundling options, eligibility determinations, and operations approvals, A-RNP eligible aircraft are NOT automatically eligible for RNP AR APCH or RNP AR DP operations, as RNP AR eligibility requires a separate determination process and special FAA authorization, RNP 1 requires a lateral accuracy value of 1 for arrival and departure in the terminal area, and the initial and intermediate approach phase when used on conventional procedures with PBN segments (for example, an ILS with a PBN feeder, IAF, or missed approach). Information on available Canadian charts and publications may be obtained from designated FAA chart agents or by contacting the: Information on available Mexican charts and publications may be obtained by contacting: A free ICAO Publications and Audio-Visual Training Aids Catalogue is available from: The FAA publishes a list of charts and publications with the, Additional information regarding content on aeronautical charts can be found in the. (See also the latest AC 91-70, Oceanic and Remote Continental Airspace Operations, for more information on oceanic RNP/RNAV operations. Still looking for something? When flying GPS approaches, particularly in IMC, pilots should have a backup plan in the event of GPS anomalies. The Certified Flight Instructor's (CFI) notebook is the critical reference material gathered throughout flight training. Pilots must not change any database waypoint type from a fly-by to fly-over, or vice versa. Instrument Rating Lesson Plans - CFI Notebook In general, these types of unintentional interference are localized and intermittent. Landmarks may be hard to spot, but there are some tricks you can use: Offset to the landmark slightly to have better visibility out the side of the aircraft looking straight down, Use Google Earn to spot nearby landmarks to reference when near. With this comes the need to keep things organized to reduce Foreign Object Debris (FOD) and confusion in flight. ", Checkpoints should be appropriately 10 NM apart, They may be points off the route which you can identify when abeam, Use of tools such as satellite maps (Google, Bing, etc.) On AeroNav Products charts, very high frequencies and ultra-high frequencies (VHF/UHF) NAVAIDs (e.g., VORs) are depicted in black, while low frequencies and medium frequencies (LF/MF) are depicted as brown. Still looking for something? | Privacy Policy | Terms of Service | Sitemap | Patreon | Contact, https://www.faa.gov/about/office_org/headquarters_offices/avs/offices/afx/afs/afs400/afs410/media/AC90-100compliance.pdf, GNSS Intentional Administration Interference and Spoofing report, Federal Aviation Administration - Pilot/Controller Glossary, Aeronautical Information Manual (1-1-17) Global Positioning System, Aeronautical Information Manual (1-1-18) Wide Area Augmentation System (WAAS), Aeronautical Information Manual (1-2-1) General, Aeronautical Information Manual (1-2-3) Use of Suitable Area Navigation (RNAV) Systems on Conventional Procedures and Routes, As air travel has evolved, methods of navigation have improved to give operators more flexibility, PBN exists under the umbrella of area navigation (RNAV) [, The term RNAV in this context, as in procedure titles, just means "area navigation," regardless of the equipment capability of the aircraft, Many operators have upgraded their systems to obtain the benefits of PBN. navigation and flight planning diversions Diversions Introduction: Diversions are deviations from the original plan which are usually due to fuel, weather, aeromedical or systems While no one plans to divert, the first time the situation dictates a diversion, you should have already planned ahead RNP 0.3 is not authorized for oceanic, remote, or the final approach segment. Each procedure is designated for use with a specific electronic navigational aid, such as ILS, VOR, NDB, RNAV, etc. For example, RNP 1 is different from RNAV 1, and an RNP 1 eligibility does NOT mean automatic RNP 2 or RNAV 1 eligibility. These events are geographically limited, coordinated, scheduled, and advertised via GPS and/or WAAS NOTAMS. Supporting structures such as guy wires exist here as well, Some locations identify these obstructions with unique sequencing flashing white strobe light systems, However, many power lines do not require notice to the FAA and, therefore, are not marked and/or lighted, Many of those that do require notice do not exceed 200 feet AGL or meet the Obstruction Standard of 14 CFR Part 77 and, therefore, are not marked and/or lighted, Pilots are cautioned to remain extremely vigilant, especially in the case of seaplane and/or float-equipped aircraft, The majority of unmanned free balloons currently being operated have, extending below them, either a suspension device to which the payload or instrument package is attached or a trailing wire antenna, or both, Good judgment on the part of the pilot dictates that aircraft should remain well clear of all unmanned free balloons and flight below them should be avoided at all times, Pilots are urged to report any unmanned free balloons sighted to the nearest FAA ground facility with which communication is established to assist FAA ATC facilities in identifying and flight following unmanned free balloons operating in the airspace. COPs are prescribed for Federal airways, jet routes, area navigation routes, or other direct routes for which an MEA is designated under 14 CFR Part 95 The COP is a point along the route or airway segment between two adjacent navigation facilities or waypoints where changeover in navigation guidance should occur and the termination point (e.g., the path terminates at an altitude, distance, fix, etc. Initial data elements included are: Airport and Helicopter Records, VHF and NDB Navigation aids, en route waypoints and airways. VFR Cross-Country Flight - CFI Notebook Other "advanced" options for use in the en route environment (such as fixed radius transitions and Time of Arrival Control) are optional in the U.S. The use of an automatic or manual runway update is an acceptable means of compliance with this requirement. Continue searching. Airplane Flight Controls Lesson - wificfi.com Fundamentals of Instructing Task A: Human Behavior and Effective Communication Task B: The Learning Process Task C: The Teaching Process Task D: Assessment and Critique Task E: Instructor Responsibilities and Professionalism Task F: Techniques of Flight Instruction Task G: Risk Management II. An example of a generic NAVLOG is provided below: Fill out the departure and arrival airport information including frequencies, traffic altitudes, and heights above ground, Fill in information concerning flight service or any item you will want to reference in regards to that airport, If you want, draw an airport diagram in the box but still carry a larger printed diagram for easier use and more detail, Determine a MSL cruise altitude based on weather and direction of flight, Calculate pressure altitude for your airport (important for performance calculations), Determine the temperature (important for performance calculations), Calculate density altitude (important for performance calculations), Determine a horsepower setting and the accompanying RPM settings, KTAS and Gallons per Hour, Used to plot any changes to a heading for the entire route to estimate times, distances and fuel used, Fuel Planning calculated with flight computer (arrow on GPH, read under time), List all checkpoints and associated distances, Write in any frequencies or IDs for route navigation, GS (first or second line only): copy from preflight log, In flight you will be filling in the other boxes as the flight progresses, Weight and balance as calculated normally, Fill out any weather information or notes you may have, Fill out the flight plan for flight service, All information is from the front of the navigation log, Filed before flight with the FSS so they can keep a track of you. Those subject areas are all listed below: Fundamentals of Instruction The Learning Process Human Behavior and Effective Communication The Teaching Process Teaching Methods Critique and Evaluation Continue searching. In such airspace, the RNAV 10 NavSpec will be applied, so any aircraft eligible for RNP 10 will be deemed eligible for RNAV 10 operations. Flight Instructor Lesson Plans - CFI Notebook Charted RNP values of 0.30 or below should contain two decimal places (for example, RNP 0.15, or 0.10, or 0.30) whereas the NavSpec title will only state "RNP 0.3", U.S. standard lateral accuracy values typically used for various routes and procedures supporting RNAV operations may be based on use of a specific navigational system or sensor such as GPS, or on multi-sensor RNAV systems having suitable performance, In the U.S., PBN requirements like Lateral Accuracy Values or NavSpecs applicable to a procedure will be depicted on affected charts and procedures. Additionally, some satellite communications avionics use GPS signals for operations in oceanic and remote airspaces. PDF Flight Instructor PTS with changes 1 through 6 Copyright 2023 CFI Notebook, All rights reserved. When operating below 18,000 feet MSL and: When operating above 18,000 feet MSL, maintain the altitude or flight level assigned by ATC, Account for changes in direction of flight along a flight plan and corresponding altitude changes to meet the standard, ATC may give other restrictions if you are under their control, say with, IFR Cruising Altitudes can be found by referencing FAR 91.179. | Privacy Policy | Terms of Service | Sitemap | Patreon | Contact, https://www.fly.faa.gov/adv/advAdvisoryForm.jsp. Of greater and growing concern is the intentional and unauthorized interference of GPS signals by persons using "jammers" or "spoofers" to disrupt air navigation by interfering with the reception of valid satellite signals, The U.S. government regularly conducts GPS tests, training activities, and exercises that interfere with GPS signals. It is this concept that requires each NavSpec eligibility to be listed separately in the avionics documents or AFM. IFR En-Route Charts - CFI Notebook on a sectional chart, Next find the lines of longitude on a map, Grab your plotter and place the reference hole over the intersection of the line of longitude, Rotate the plotter so that it is parallel to the line you drew, Where the line of longitude intersects the compass rose on the plotter, determine your true course, If there is more than one number, chose the number most appropriate for your direction of flight, First, determine your wind correction angle, True Heading = True Course (-left/+right) WCA, Magnetic north is the direction along the earth's surface which points toward the magnetic north pole, Magnetic compasses point to this location and therefore it is magnetic headings that are flown, The magnetic north pole is a shifting point which is not coincident with the "top" of the earth as defined by latitude and longitude. Call: (916) 427-7707. The system must be able to retrieve the procedure by name from the aircraft navigation database, not just as a manually entered series of waypoints, Whenever possible, RNAV routes (Q- or T-route) should be extracted from the database in their entirety, rather than loading RNAV route waypoints from the database into the flight plan individually. Further, any aircraft eligible for RNP 4 operations is automatically qualified for RNP 10/ RNAV 10 operations. If an alternate is required, the alternate airport must have an instrument approach while meeting certain criteria: 800' ceiling, 2 miles visibility, if non-precision approach, 600' ceiling, 2 miles visibility, if precision approach, If no approach exists for the alternate runway, descent from cruising altitude must be possible under Visual Flight Rules, Note that minimums published for approaches may differ, Navigation can be accomplished in several ways, Two examples include pilotage and dead reckoning which, although different, are not mutually exclusive, Dead recokoning is navigation by planning, When track = course you are flying exactly where you intend, Various tools are necessary to complete a flight plan, Generally the most direct route is preferred but several considerations may require some deviation, Checkpoints allow you to follow the progress of your flight against your planning calculations, Landmarks can be checkpoints but may also inform a pilot where they are in relation to checkpoints. A-RNP allows for scalable RNP lateral navigation values (either 1.0 or 0.3) in the terminal environment. As a safeguard, the FAA requires that aircraft navigation databases hold only those procedures that the aircraft maintains eligibility for. PDF Erau Flight Plan - CFI Notebook: "Higher" Education Copyright 2023 CFI Notebook, All rights reserved. Use the capabilities of your avionics suite to verify the appropriate waypoint and track data after loading the procedure from your database, Lateral Accuracy values are applicable to a selected airspace, route, or procedure, The lateral accuracy value is a value typically expressed as a distance in nautical miles from the intended centerline of a procedure, route, or path, RNP applications also account for potential errors at some multiple of lateral accuracy value (for example, twice the RNP lateral accuracy values), In the U.S., RNP APCH procedures are titled RNAV (GPS) and offer several lines of minima to accommodate varying levels of aircraft equipage: either lateral navigation (LNAV), LNAV/vertical navigation (LNAV/VNAV), Localizer Performance with Vertical Guidance (LPV), and Localizer Performance (LP). Navigation Charts - CFI Notebook With this comes the need to keep things organized to reduce Foreign Object Debris (FOD) and confusion in flight. For example, an ILS with an RNAV missed approach would require a specific capability to fly the missed approach portion of the procedure. Task II.G: Navigation and Flight Planning | Mark Berry - CFI Notebook Navigation Systems and Radar Services Lesson Plan - CFI Notebook Although the appropriate response will vary with the situation, in general pilots should: Use the last reliable navigation information as the basis for initial headings, and climb above terrain, Change to another source of navigation, if available (i.e., VOR, DME radar vectors), Pilots should promptly notify ATC if they experience GPS anomalies. The separate Equipment Requirements box will list ground-based equipment and/or airport specific requirements. VFR Navigation charts consist of the following: Designed for visual navigation of slow to medium speed aircraft, The topographic information consists of contour lines, shaded relief, drainage patterns, and an extensive selection of visual checkpoints and landmarks used for flight under VFR, Cultural features include cities and towns, roads, railroads, and other distinct landmarks, The aeronautical information includes visual and radio aids to navigation, airports, controlled airspace, special-use airspace, obstructions, and related data, Revised every 56 days, except most Alaskan charts are revised annually, TACs depict the airspace designated as Class B airspace, While similar to sectional charts, TACs have more detail because the scale is larger, Should be used by pilots intending to operate to or from airfields within or near Class B or class C airspace, Charted VFR Flyway Planning Charts are published on the back of the existing VFR Terminal Area Charts, Areas with TAC coverage are indication by a dot on the Sectional Chart indexes, Charts are revised every 56 days, except Puerto Rico-Virgin Islands revised annually, Designated primarily for helicopter operation in the Gulf of Mexico area, Information depicted includes offshore mineral leasing areas and blocks, oil drilling platforms, and high density helicopter activity areas, Covers the Grand Canyon National Park area and is designated to promote aviation safety, flight free zones, and facility VFR navigation in this popular area, The chart contains aeronautical information for general aviation for VFR pilots on one side and commercial VFR air tour operators on the other side, Caribbean 1 and 2 (CAC-1 and CAC-2) are designed for visual navigation to assist familiarization of foreign aeronautical and topographic information, The topographic information consists of contour lines, shaded relief, drainage patterns, and a selection of landmarks used for flight under VFR, A three-color chart series which shows current aeronautical information useful to helicopter pilots navigating in areas with high concentrations of helicopter activity, Information depiction includes helicopter routes, four classes of heliports with associated frequency and lighting capabilities, NAVAIDs, and obstructions, In addition, pictorial symbols, roads, and easily identified geographical features are portrayed, Have a longer life span than other charts and may be current for several years, updated as requested, Provide aeronautical information navigation under IFR conditions below 18,000' MSL, This four-color chart series includes airways; limits of controlled airspace; VHF NAVAIDs with frequency, identification, channel, geographic coordinates; airports with terminal air/ground communication; minimum en route and obstruction clearance altitudes; airway distances; reporting points; special use airspace; and military training routes, Scales vary from 1 inch = 5nm to 1 inch = 20nm, Area charts show congested terminal areas at large scale, They are included with subscriptions to any conterminous U.S. Set Low (full set, East or West sets), Designated for navigation at or above 18,000' MSL (up to FL 600), This four-color chart series includes the jet route structure; VHF NAVAIDs with frequency, identification, channel, geographic coordinates; selected airports; reporting points, Scales vary from 1 inch to 45nm to 1 inch = 18nm, TPPs are published in 24 loose-leaf or perfect bound volumes covering the conterminous U.S., Puerto Rico and the Virgin Islands, A Change Notice is published at the midpoint between revisions in bound volume format and is available on the internet for a free download at the AeroNav website, IAP charts portray the aeronautical data that is required to execute instrument approaches to airports, Each chart depicts the IAP, all related navigation data, communications information, and an airport sketch. The database is updated every 28 days. Flight Deck Management Lesson Plan - CFI Notebook LNAV/VNAV incorporates LNAV lateral with vertical path guidance for systems and operators capable of either barometric or SBAS vertical. [Figure 1-5], Intersections along the airway route are established by a variety of NAVAIDs, NDBs, localizers, and off-route VORs are used to establish intersections, NDBs are sometimes collocated with intersections, in which case passage of the NDB would mark the intersection, A bearing to an off-route NDB also can provide intersection identification, A localizer course used to identify an intersection is depicted by a feathered arrowhead symbol on the en route chart (, If feathered markings appear on the left-hand side of the arrowhead (, On AeroNav Products en route charts, the localizer symbol is only depicted to identify an intersection, Off-route VORs remain the most common means of identifying intersections when traveling on an airway, Another means of identifying an intersection is with the use of DME, If the DME mileage at the intersection is a cumulative distance of route segments, the mileage is totaled and indicated by a D-shaped symbol with a mileage number inside, [Figure 1-4] Approved IFR global positioning system (GPS) units can also be used to report intersections, DME and GPS provide valuable route information concerning such factors as mileage, position, and ground speed, Even without this equipment, information is provided on the charts for making the necessary calculations using time and distance, The en route chart depicts point-to-point distances on the airway system, Distances from VOR to VOR are charted with a number inside of a box, To differentiate distances when two airways coincide, the word "TO" with the three-letter VOR identifier appear to the left of the distance boxes, VOR changeover points (COPs) are depicted on the charts by this symbol, The numbers indicate the distance at which to change the VOR frequency, The frequency change might be required due to signal reception or conflicting frequencies, If a COP does not appear on an airway, the frequency should be changed midway between the facilities, A COP at an intersection may indicate a course change, Occasionally an "x" appears at a separated segment of an airway that is not an intersection, The "x" is a mileage breakdown or computer navigation fix and may indicate a course change, Today's computerized system of ATC has greatly reduced the need for holding en route, However, published holding patterns are still found on charts at junctures where ATC has deemed it necessary to enable traffic flow, When a holding pattern is charted, the controller may provide the holding direction and the statement "as published. The CFI, or Flight Instructor Notebook, is an instructor's guide to navigating the sea of resources to provide useful guidance for their students and themselves. No other modification of database waypoints or the creation of user-defined waypoints on published RNAV or RNP procedures is permitted, except to: Change altitude and/or airspeed waypoint constraints to comply with an ATC clearance/instruction, Insert a waypoint along the published route to assist in complying with ATC instruction, example, "Descend via the WILMS arrival except cross 30 north of BRUCE at/or below FL 210." Altitude selection depends on a variety of factors which include: Although seemingly obvious, controlled flight into terrain is still a leading caues of aviation accidents, Terrain and obstacles along the route of flight must be avoided either laterally or vertically, Additionally, a brief study of the map should highlight hazards should the pilot chose to alter the route, in flight, Numerous skeletal structures such as radio and television antenna towers exceed 1,000' or 2,000' AGL, Most skeletal structures are supported by guy wires which are very difficult to see in good weather and can be invisible at dusk or during periods of reduced visibility, These wires can extend about 1,500 feet horizontally from a structure; therefore, all skeletal structures should be avoided horizontally by at least 2,000 feet, Additionally, new towers may not be on your current chart because the information was not received prior to the printing of the chart. A table of compliant equipment is available at the following website: Subject to the operating requirements, operators may use a suitable RNAV system in the following ways, Determine aircraft position relative to, or distance from a VOR (see NOTE 6 below), TACAN, NDB, compass locator, DME fix; or a named fix defined by a VOR radial, TACAN course, NDB bearing, or compass locator bearing intersecting a VOR or localizer course, Navigate to or from a VOR, TACAN, NDB, or compass locator, Hold over a VOR, TACAN, NDB, compass locator, or DME fix, This restriction includes conducting a conventional approach at the alternate airport using a substitute means of navigation that is based upon the use of GPS, For example, these restrictions would apply when planning to use GPS equipment as a substitute means of navigation for an out-of-service VOR that supports an ILS missed approach procedure at an alternate airport, In this case, some other approach not reliant upon the use of GPS must be available, This restriction does not apply to RNAV systems using TSO-C145/-C146, For flight planning purposes, TSO-C129() and TSO-C196() equipped users (GPS users) whose navigation systems have fault detection and exclusion (FDE) capability, who perform a preflight RAIM prediction at the airport where the RNAV (GPS) approach will be flown, and have proper knowledge and any required training and/or approval to conduct a GPS-based IAP, may file based on a GPS-based IAP at either the destination or the alternate airport, but not at both locations. Some business aircraft are using GPS as a reference source for aircraft flight control and stability systems. This includes terrain, navaid coverage, emergency options, etc. Usually, the first indication of flying into restricted visibility conditions is the gradual disappearance of lights on the ground If the lights begin to take on an appearance of being surrounded by a halo or glow, the pilot should use caution in attempting further flight in that same direction Cockpit Management - CFI Notebook Additional digital data may easily be overlaid on the raster image using commonly available Geographic Information System software. In the U.S., a specific procedure's Performance-Based Navigation (PBN) requirements will be prominently displayed in separate, standardized notes boxes. Loss of Communications. Multiply 0.1 by 60 (minutes in an hour) and you'll get 6, for 6 minutes to travel that distance at that ground speed. airport hours of operations, types of fuel available, runway widths, lighting codes, etc. If you do not close the flight plan 30 minutes after the proposed arrival time, SAR (search and rescue) procedures begin, Fill out airspeeds, runway lengths, and altitudes, After you've completed your flight log, consider the creation of an inflight guide to keep on your kneeboard during flight, This inflight guide is not intended to create an extra step in flight planning but instead to make your life easier when you're flying. Weather products like windy.com offer additional insight into aviation weather forecasts and observations, Review your flight planning safety knowledge by taking the. Is time lost fighting a headwind gained back when riding a tailwind? Navigation and Flight Planning - CFI Notebook